How to add fades

  1. Select the Audio Pattern.
  2. Open the Inspector.
  3. Under the Samples properties section of the Inspector, adjust the Fade in/out duration.



 


The Volume parameter is the Audio Pattern's maximum level, which value is fixed at 1 by default (i.e. the sample's original volume).

 

The Fade In parameter lets you set the duration it will take the sample to reach the Volume value you defined. The counting starts from the beginning of the Audio Pattern.

 

Conversely, the Fade Out parameter lets you set the duration it will take the sample to become "silent". The counting starts backwards from the end of the Audio Pattern.

 

Leaving these Fade In/Out parameters unchanged or setting them back to 0:0:0 comes back to applying no fade.

 

 

 

 

_____

Go back to How to... index.

Go back to Help menu.